| Título |
CO2 capture enhancement in a fluidized bed of a modified Geldart C powder |
| Autores |
Valverde, J. M. , DURAN OLIVENCIA, FRANCISCO JOSÉ, Pontiga, F. , Moreno, H. |
| Publicación externa |
Si |
| Medio |
POWDER TECHNOLOGY |
| Alcance |
Article |
| Naturaleza |
Científica |
| Cuartil JCR |
2 |
| Cuartil SJR |
1 |
| Impacto JCR |
2.024 |
| Impacto SJR |
0.844 |
| Fecha de publicacion |
01/07/2012 |
| ISI |
000304792000032 |
| DOI |
10.1016/j.powtec.2012.02.060 |
| Abstract |
In this work, we analyze the CO2 adsorption performance in a fluidized bed of a modified adsorbent, which is obtained by dry mixing a Ca(OH)2 fine cohesive powder (Geldart C) with a fluidizable silica nanopowder. The silica nanoparticle agglomerates serve as carriers of the adsorbent Ca(OH)(2) fine particles, which are thus provided with a vehicle for improved fluidization. Experimental measurements are presented on the capture capacity of the modified adsorbent as compared to the original adsorbent. As the gas flow rate is increased, gas channeling in the fluidized bed of the original adsorbent causes a rapid decrease of the time for CO2 breakthrough in the effluent gas (BT) and the capture capacity at CO2 breakthrough (X-BT.). In contrast, because of the improvement of gas-solid contact efficiency, BT and XBT are appreciably increased for the modified adsorbent. Thus, even though the silica nanoparticle agglomerates do not contribute directly to CO2 adsorption, fluidization enhancement allows for maintaining relatively higher capture capacities at large values of the gas flow rate. (C) 2012 Elsevier B.V. All rights reserved. |
| Palabras clave |
Fluidization; Powder technology; Adsorption; Particulate processes |
| Miembros de la Universidad Loyola |
|
Gestionar cookies