Título Fabrication of bio-inspired deterministic surfaces by photochemical machining for tribological applications
Autores Sanchez, J. C. , Toro, A. , Estupinan, H. A. , Leighton, G. J. T. , ENDRINO ARMENTEROS, JOSÉ LUIS
Publicación externa Si
Medio TRIBOLOGY INTERNATIONAL
Alcance Article
Naturaleza Científica
Cuartil JCR 1
Cuartil SJR 1
Impacto JCR 4.87200
Impacto SJR 1.40100
Web https://www.scopus.com/inward/record.uri?eid=2-s2.0-85083650044&doi=10.1016%2fj.triboint.2020.106341&partnerID=40&md5=6c90ed9d27ebb24b42514137200e0a7e
Fecha de publicacion 01/10/2020
ISI 539161200004
Scopus Id 2-s2.0-85083650044
DOI 10.1016/j.triboint.2020.106341
Abstract Surface texturing of AISI 52100 steel was carried out by photochemical machining. The geometrical parameters of the textured patterns were inspired by the characteristics of the skin of Vipera Ammodytes snake. The influence of the etching time and the size of the features on the quality of the textured surfaces was studied, as well as the effect of chemical modification on the surfaces etched by photochemical machining. The textured surfaces were tested in a pin-on-disc tribometer to evaluate the frictional response of the deterministic surfaces in comparison to stochastic surfaces. The results showed a marked influence of the etching time on the size and shape of the texture features, as well as a correlation between the coefficient of friction and the apparent contact area of the texture patterns. Also, a reduction of coefficient of friction was observed due to the deposition of WS2 and Graphite coatings onto the textured surfaces.
Palabras clave Deterministic surface; Photochemical machining; Pin-on-disc tests; Coefficient of friction
Miembros de la Universidad Loyola

Change your preferences Gestionar cookies