Título Multi-objective optimisation and guidelines for the design of dispatchable hybrid solar power plants with thermochemical energy storage
Autores Bravo R. , ORTIZ DOMÍNGUEZ, CARLOS, Chacartegui R. , Friedrich D.
Publicación externa No
Alcance Article
Naturaleza Científica
Cuartil JCR 1
Cuartil SJR 1
Impacto JCR 11.44600
Impacto SJR 3.06200
Web https://www.scopus.com/inward/record.uri?eid=2-s2.0-85097769890&doi=10.1016%2fj.apenergy.2020.116257&partnerID=40&md5=b8a7a74acd03d21891375bd95c63c076
Fecha de publicacion 01/01/2021
ISI 599888400016
Scopus Id 2-s2.0-85097769890
DOI 10.1016/j.apenergy.2020.116257
Abstract The drive to net zero energy requires high renewable penetration but most renewables are either affordable or dispatchable but not both. Thermochemical energy storage integrated into concentrating solar power plants can enhance dispatchability and solar-to-electricity efficiency. Combining these technologies with lower cost photovoltaic plants exploits synergies related to dispatchability and costs. However, this combination leads to complex interactions between the different power plant components and requires sophisticated design guidelines to simultaneously achieve low costs and high dispatchability. Here, we develop multi-objective optimisations and guidelines for the design of hybrid solar power plants with a calcium-looping thermochemical energy storage system. The presented tools focus on the optimisation of the design and operation of hybrid power plants with respect to competing technical and financial performance metrics. First, the design optimisation stage evaluates ten design variables and three objectives. Then, the operational optimisation stage, which is nested inside the design stage, finds the best one-year hourly operational strategy for each configuration considered in the first stage. We evaluated three case studies with different solar resource: Seville (Spain), Tonopah (United States), and the Atacama Desert (Chile). The best dispatchable hybrid solar power plant with Levelised cost of electricity of 123 USD·MWh-1 and a capacity factor of 73% is reached for the Atacama Desert, which has the best solar resource. The optimisation results are used to develop guidelines for the optimal design of dispatchable hybrid solar power plants with calcium-looping based on the given solar resource and required dispatchability. These guidelines provide an initial design for affordable and dispatchable hybrid solar power plants and can enable their widespread deployment. © 2020 Elsevier Ltd
Palabras clave Calcium; Electric energy storage; Electric load dispatching; Multiobjective optimization; Concentrating solar power plant; Design and operations; Electricity efficiencies; Financial performance; Hybri
Miembros de la Universidad Loyola

Change your preferences Gestionar cookies