Título Nano- and micro-scale impact testing of zirconia, alumina and zirconia-alumina duplex optical coatings on glass
Autores Beake, Ben D. , Isern, Luis , Bhattacharyya, Debabrata , ENDRINO ARMENTEROS, JOSÉ LUIS, Lawson, Ken , Walker, Trevor
Publicación externa Si
Medio Wear
Alcance Article
Naturaleza Científica
Cuartil JCR 1
Cuartil SJR 1
Impacto JCR 3.89200
Impacto SJR 1.20500
Web https://www.scopus.com/inward/record.uri?eid=2-s2.0-85092744542&doi=10.1016%2fj.wear.2020.203499&partnerID=40&md5=93968073463531452f98adef64e67776
Fecha de publicacion 15/12/2020
ISI 595091400003
Scopus Id 2-s2.0-85092744542
DOI 10.1016/j.wear.2020.203499
Abstract Optimising the mechanical properties of optical coatings to improve their durability will be critical if they are to be used successfully in harsh environments where they may be subject to degradation by mechanical contact. In this study zirconia, zirconia-alumina duplex and alumina experimental coatings were deposited on soda lime and borosilicate glass and their resistance to repetitive impact under different experimental conditions evaluated in nanoand micro-scale impact tests. The influence of changing probe geometry (sharp and blunt contacts) and applied load on the deformation was studied. Spheroconical indenters were found to be more suitable to study the load sensitivity of the impact response than sharp cube corner indenters. Increased resistance to plastic deformation in the coating-substrate system (H-3/E-2) proved detrimental to the damage tolerance to the repetitive nanoand micro-impact tests. To compare the deformation behaviour in nano-impact and nano-scratch, tests were performed using the same spheroconical probe, revealing cracking and blistering of the glass substrate in both types of test. The change in probe depth after the first impact was found to be a very useful metric to effectively compare the evolution of surface damage on continued impact in nanoand micro-impact tests at different applied load and probe geometry.
Palabras clave Surface analysis; PVD coatings; Fracture behaviour; Impact wear; Optical; Wear testing
Miembros de la Universidad Loyola

Change your preferences Gestionar cookies