Título Physical and Chemical Properties Characterization of 3D-Printed Substrates Loaded with Copper-Nickel Nanowires
Autores V-Nino, Ely Dannier , Lonne, Quentin , Diaz Lantada, Andres , Mejia-Ospino, Enrique , Estupinan Duran, Hugo Armando , Cabanzo Hernandez, Rafael , Ramirez-Caballero, Gustavo , ENDRINO ARMENTEROS, JOSÉ LUIS
Publicación externa Si
Medio Polymers
Alcance Article
Naturaleza Científica
Cuartil JCR 1
Cuartil SJR 1
Impacto JCR 4.32900
Impacto SJR 0.77000
Web https://www.scopus.com/inward/record.uri?eid=2-s2.0-85096210054&doi=10.3390%2fpolym12112680&partnerID=40&md5=69ba6d6e6ac909bac4f3a70e121f5bf8
Fecha de publicacion 01/11/2020
ISI 594963300001
Scopus Id 2-s2.0-85096210054
DOI 10.3390/polym12112680
Abstract This study deals with the laser stereolithography manufacturing feasibility of copper-nickel nanowire-loaded photosensitive resins. The addition of nanowires resulted in a novel resin suitable for additive manufacturing technologies based on layer-by-layer photopolymerization. The pure and nanowire-loaded resin samples were 3D printed in a similar way. Their morphological, mechanical, thermal, and chemical properties were characterized. X-ray computed tomography revealed that 0.06 vol % of the composite resin was filled with nanowires forming randomly distributed aggregates. The increase of 57% in the storage modulus and 50% in the hardness when loading the resin with nanowire was attributed to the load transfer. Moreover, the decrease in the glass transition temperature from 57.9 degrees C to 52.8 degrees C in the polymeric matrix with nanowires evidenced a decrease in the cross-linking density, leading to a higher mobility of the polymer chains during glass transition. Consequently, this research demonstrates the successful dispersion and use of copper-nickel nanowires as a reinforcement material in a commercial resin for laser stereolithography.
Palabras clave nanofillers; bulk-functionalization; photopolymer resin; additive manufacturing; stereolithography
Miembros de la Universidad Loyola

Change your preferences Gestionar cookies